Ordering information DC-DC Converters PCB Mount Type MGFW1R5 MGF 1 W 2 1R5 3 24 12 4 5 1 Series name 2 Dual output 3 Output wattage 4 Input voltage 5 Output voltage 6 Optional R MODEL MGFW1R52412 MGFW1R52415 MGFW1R54812 MGFW1R54815 MAX OUTPUT WATTAGE[W] 1.56 1.50 1.56 1.50 12 or +24 15 or +30 12 or +24 15 or +30 0.065 0.05 0.065 0.05 MODEL MGFW1R52412 MGFW1R52415 MGFW1R54812 MGFW1R54815 VOLTAGE[V] DC9 - 36 (Surge voltage 50V, 100ms max) DC18 - 76 (Surge voltage 100V, 100ms max) VOLTAGE[V] DC OUTPUT *1 CURRENT[A] SPECIFICATIONS INPUT CURRENT[A] *2 0.081typ 0.079typ 0.041typ 0.040typ EFFICIENCY[%] *2 81typ 80typ 81typ 79typ VOLTAGE[V] 12 (+24) 15 (+30) 12 (+24) 15 (+30) CURRENT[A] 0.065 0.05 0.065 0.05 LINE REGULATION[mV] 60max 75max 60max 75max *3 480max 600max 480max 600max *4 600max 750max 600max 750max RIPPLE[mVp-p] *5 150max 150max 150max 150max RIPPLE NOISE[mVp-p] *5 200max 200max 200max 200max -20 to +85C 210max 260max 150max 180max -40 to +85C 320max 390max 240max 290max 60max 48max 60max 11.64 - 12.36 14.55 - 15.45 LOAD REGULATION[mV] OUTPUT TEMPERATURE REGULATION[mV] DRIFT[mV] *6 48max START-UP TIME[ms] 30max (Minimum input, Io=100%) OUTPUT VOLTAGE SETTING[V] 11.64 - 12.36 14.55 - 15.45 PROTECTION CIRCUIT OVERCURRENT PROTECTION Works over 105% of rating and recovers automatically ISOLATION INPUT-OUTPUT DC1,500V or AC1,000V 1minute, Cutoff current=10mA, DC500V 1,000MW min (2015C) OPERATING TEMP.,HUMID.AND ALTITUDE -40 to +85C, 20 to 95%RH (Non condensing) (Required derating), 5,000m (16,400feet) max ENVIRONMENT SAFETY OTHERS STORAGE TEMP.,HUMID.AND ALTITUDE -40 to +100C, 20 to 95%RH (Non condensing), 9,000m (30,000feet) max VIBRATION 10 - 55Hz 98.0m/s2 (10G), 3minute period, 60minutes each along X, Y and Z axis IMPACT 490.3m/s2 (50G) 11ms, once each along X, Y and Z axis AGENCY APPROVALS UL60950-1, C-UL, EN60950-1 CASE SIZE/WEIGHT 17.0X12.0X8.5mm [0.67X0.48X0.34 inches] (WXHXD) / 4g max COOLING METHOD Convection/Forced air *1Single output +24V, +30V with no use of COM. *2Rated input 24V or 48V DC Io=100% *3Symmetrical loading from 20% to 100%. *4Symmetrical loading from 0% to 100%. *5Ripple and Ripple Noise is measured by using test board with ceramic capacitor 1 F at 50mm from output pins. *6Drift is the DC output accuracy for eight hours period after a half-hour warm-up at 25C. *Parallel operation with other model is not possible. MG-40 -O 6 MGFW1R5 External view Recommended Pad and Hole dia. Model TOP VIEW 5-f0.9 3.5 [0.14] 0.5 [0.02] 12 [0.48] Model Vin Vin 2.2 [0.09] 12.7 [0.5] Vout COM Vout 17 [0.67] 0.25 [0.01] 8.5 [0.34] 2.54 [0.1] 2.8 [0.11] Unit : 0.1inch Dimension : mm Tolerance 0.5 [0.02] Dimensions in mm, [ ]= inches Pin terminal material : Copper Planting treatment of terminal : Lead free plating Case material : PBT Weight 4g max 0.5 [0.02] MG-41 Ordering information DC-DC Converters PCB Mount Type MGFW3 MGF 1 W 2 3 3 24 12 4 5 -O 6 1 Series name 2 Dual output 3 Output wattage 4 Input voltage 5 Output voltage 6 Optional R MODEL MGFW32412 MGFW32415 MGFW34812 MGFW34815 MAX OUTPUT WATTAGE[W] 3.12 3.00 3.12 3.00 12 or +24 15 or +30 12 or +24 15 or +30 0.13 0.1 0.13 0.1 MODEL MGFW32412 MGFW32415 MGFW34812 MGFW34815 VOLTAGE[V] DC9 - 36 (Surge voltage 50V,100ms max) (Refer to the instruction manual for input voltage derating.) DC18 - 76 (Surge voltage 100V,100ms max) (Refer to the instruction manual for input voltage derating.) VOLTAGE[V] DC OUTPUT *1 CURRENT[A] SPECIFICATIONS INPUT CURRENT[A] *2 0.16typ 0.16typ 0.081typ 0.078typ EFFICIENCY[%] *2 82typ 82typ 81typ 81typ VOLTAGE[V] 12 (+24) 15 (+30) 12 (+24) 15 (+30) CURRENT[A] 0.13 0.1 0.13 0.1 LINE REGULATION[mV] 60max 75max 60max 75max *3 480max 600max 480max 600max *4 600max 750max 600max 750max RIPPLE[mVp-p] *5 150max 150max 150max 150max RIPPLE NOISE[mVp-p] *5 200max 200max 200max 200max -20 to +70C 180max 220max 180max 220max -40 to +70C 290max 340max 290max 340max 60max 48max 60max 11.64 - 12.36 14.55 - 15.45 LOAD REGULATION[mV] OUTPUT TEMPERATURE REGULATION[mV] DRIFT[mV] *6 48max START-UP TIME[ms] 30max (Minimum input, Io=100%) OUTPUT VOLTAGE SETTING[V] 11.64 - 12.36 14.55 - 15.45 PROTECTION CIRCUIT OVERCURRENT PROTECTION Works over 105% of rating and recovers automatically ISOLATION INPUT-OUTPUT DC1,500V or AC1,000V 1minute, Cutoff current=10mA, DC500V 1,000MW min (2015C) OPERATING TEMP.,HUMID.AND ALTITUDE -40 to +85C, 20 to 95%RH (Non condensing) (Required derating), 5,000m (16,400feet) max ENVIRONMENT SAFETY OTHERS STORAGE TEMP.,HUMID.AND ALTITUDE -40 to +100C, 20 to 95%RH (Non condensing), 9,000m (30,000feet) max VIBRATION 10 - 55Hz 98.0m/s2 (10G), 3minute period, 60minutes each along X, Y and Z axis IMPACT 490.3m/s2 (50G) 11ms, once each along X, Y and Z axis AGENCY APPROVALS UL60950-1, C-UL, EN60950-1 CASE SIZE/WEIGHT 17.0X12.0X8.5mm [0.67X0.48X0.34 inches] (WXHXD) / 4g max COOLING METHOD Convection/Forced air *1Single output +24V, +30V with no use of COM. *2Rated input 24V or 48V DC Io=100% *3Symmetrical loading from 20% to 100%. *4Symmetrical loading from 0% to 100%. *5Ripple and Ripple Noise is measured by using test board with ceramic capacitor 1 F at 50mm from output pins. *6Drift is the DC output accuracy for eight hours period after a half-hour warm-up at 25C. *Parallel operation with other model is not possible. MG-42 MGFW3 External view Recommended Pad and Hole dia. Model TOP VIEW 5-f0.9 3.5 [0.14] 0.5 [0.02] 12 [0.48] Model Vin Vin 2.2 [0.09] 12.7 [0.5] Vout COM Vout 17 [0.67] 0.25 [0.01] 8.5 [0.34] 2.54 [0.1] 2.8 [0.11] Unit : 0.1inch Dimension : mm Tolerance 0.5 [0.02] Dimensions in mm, [ ]= inches Pin terminal material : Copper Planting treatment of terminal : Lead free plating Case material : PBT Weight 4g max 0.5 [0.02] MG-43 Ordering information DC-DC Converters PCB Mount Type MGFW6 MGF 1 W 2 6 3 24 12 4 5 1 Series name 2 Dual output 3 Output wattage 4 Input voltage 5 Output voltage 6 Optional Y2 : Output voltage adjustable (+10%, -5%) R MODEL MGFW62412 MGFW62415 MGFW64812 MGFW64815 MAX OUTPUT WATTAGE[W] 6.00 6.00 6.00 6.00 12 or +24 15 or +30 12 or +24 15 or +30 0.25 0.2 0.25 0.2 MODEL MGFW62412 MGFW62415 MGFW64812 MGFW64815 VOLTAGE[V] DC9 - 36 (Surge voltage 50V,100ms max) DC18 - 76 (Surge voltage 100V,100ms max) VOLTAGE[V] DC OUTPUT *1 CURRENT[A] SPECIFICATIONS INPUT CURRENT[A] *2 0.29typ 0.29typ 0.15typ 0.15typ EFFICIENCY[%] *2 87typ 88typ 88typ 88typ VOLTAGE[V] 12 (+24) 15 (+30) 12 (+24) 15 (+30) CURRENT[A] 0.25 0.2 0.25 0.2 LINE REGULATION[mV] 60max 75max 60max 75max *3 480max 600max 480max 600max *4 600max 750max 600max 750max 120max 120max 120max 120max Po=0 - 30% 360max 360max 360max 360max Po=30% - 200max 200max 200max 200max Po=0 - 30% 500max 500max 500max 500max -20 to +75C 190max 230max 190max 230max -40 to +75C 300max 360max 300max 360max 60max 48max 60max 11.64 - 12.36 14.55 - 15.45 LOAD REGULATION[mV] Po=30% - RIPPLE[mVp-p] OUTPUT *5 RIPPLE NOISE[mVp-p] *5 TEMPERATURE REGULATION[mV] DRIFT[mV] *6 48max START-UP TIME[ms] 30max (Minimum input, Io=100%) OUTPUT VOLTAGE SETTING[V] 11.64 - 12.36 14.55 - 15.45 PROTECTION OVERCURRENT PROTECTION CIRCUIT AND REMOTE ON/OFF OTHERS Works over 105% of rating and recovers automatically ISOLATION DC1,500V or AC1,000V 1minute, Cutoff current=10mA, DC500V 1,000MW min (2015C) INPUT-OUTPUT Provided (Negative logic L : ON, H : OFF) OPERATING TEMP.,HUMID.AND ALTITUDE -40 to +85C, 20 to 95%RH (Non condensing) (Required derating), 5,000m (16,400feet) max ENVIRONMENT SAFETY OTHERS STORAGE TEMP.,HUMID.AND ALTITUDE -40 to +100C, 20 to 95%RH (Non condensing), 9,000m (30,000feet) max VIBRATION 10 - 55Hz 98.0m/s2 (10G), 3minute period, 60minutes each along X, Y and Z axis IMPACT 490.3m/s2 (50G) 11ms, once each along X, Y and Z axis AGENCY APPROVALS UL60950-1, C-UL, EN60950-1 CASE SIZE/WEIGHT 22.0X12.0X9.5mm [0.87X0.48X0.38 inches] (WXHXD) / 7g max COOLING METHOD Convection/Forced air *1Single output +24V, +30V with no use of COM. *2Rated input 5V, 12V, 24V or 48V DC Io=100% *3Symmetrical loading from 20% to 100%. *4Symmetrical loading from 0% to 100%. *5Ripple and Ripple Noise is measured by using test board with ceramic capacitor 1 F at 50mm from output pins. Po:Output wattage. *6Drift is the DC output accuracy for eight hours period after a half-hour warm-up at 25C. *Parallel operation with other model is not possible. MG-44 -O 6 MGFW6 External view Recommended Pad and Hole dia. Model (TOP VIEW) 7-f0.9 3.5 [0.14] 0.5 [0.02] 12 [0.48] Model 2.11 [0.09] 17.78 [0.7] Vin Vin RC NC Vout COM Vout 22 [0.87] 0.25 [0.01] 9.5 [0.38] 2.54 [0.1] Unit : 0.1inch Dimension : mm 2.8 [0.11] Tolerance 0.5 [0.02] Dimensions in mm, [ ]= inches Pin terminal material : Copper Planting treatment of terminal : Lead free plating Case material : PBT Weight 7g max 0.5 [0.02] 3.5 [0.14] 0.5 [0.02] 12 [0.48] <Pin Configuration (Option : Y2)> 2.11 [0.09] 17.78 [0.7] Vin Vin RC TRM Vout COM Vout 22 [0.87] 0.25 [0.01] 9.5 [0.38] 2.54 [0.1] 0.5 [0.02] MG-45 Ordering information DC-DC Converters PCB Mount Type MGFW10 MGF 1 W 2 10 3 24 12 4 5 -O 6 1 Series name 2 Dual output 3 Output wattage 4 Input voltage 5 Output voltage 6 Optional Y2 : Output voltage adjustable (+10%, -5%) R MODEL MGFW102412 MGFW102415 MGFW104812 MGFW104815 MAX OUTPUT WATTAGE[W] 10.08 10.20 10.08 10.20 12 or +24 15 or +30 12 or +24 15 or +30 0.42 0.34 0.42 0.34 MODEL MGFW102412 MGFW102415 MGFW104812 MGFW104815 VOLTAGE[V] DC9 - 36 (Surge voltage 50V,100ms max) (Refer to the instruction manual for input voltage derating.) DC18 - 76 (Surge voltage 100V,100ms max) (Refer to the instruction manual for input voltage derating.) VOLTAGE[V] DC OUTPUT *1 CURRENT[A] SPECIFICATIONS INPUT CURRENT[A] *2 0.49typ 0.49typ 0.25typ 0.25typ EFFICIENCY[%] *2 87typ 87typ 87typ 88typ VOLTAGE[V] 12 (+24) 15 (+30) 12 (+24) 15 (+30) CURRENT[A] 0.42 0.34 0.42 0.34 LINE REGULATION[mV] 60max 75max 60max 75max *3 480max 600max 480max 600max *4 600max 750max 600max 750max 120max 120max 120max 120max Po=0 - 30% 360max 360max 360max 360max Po=30% - 200max 200max 200max 200max Po=0 - 30% 500max 500max 500max 500max -20 to +50C 150max 180max 150max 180max -40 to +50C 240max 290max 240max 290max 60max 48max 60max 11.64 - 12.36 14.55 - 15.45 LOAD REGULATION[mV] Po=30% - RIPPLE[mVp-p] OUTPUT *5 RIPPLE NOISE[mVp-p] *5 TEMPERATURE REGULATION[mV] DRIFT[mV] *6 48max START-UP TIME[ms] 30max (Minimum input, Io=100%) OUTPUT VOLTAGE SETTING[V] 11.64 - 12.36 14.55 - 15.45 PROTECTION OVERCURRENT PROTECTION CIRCUIT AND REMOTE ON/OFF OTHERS Works over 105% of rating and recovers automatically ISOLATION DC1,500V or AC1,000V 1minute, Cutoff current=10mA, DC500V 1,000MW min (2015C) INPUT-OUTPUT Provided (Negative logic L : ON, H : OFF) OPERATING TEMP.,HUMID.AND ALTITUDE -40 to +85C, 20 to 95%RH (Non condensing) (Required derating), 5,000m (16,400feet) max ENVIRONMENT SAFETY OTHERS STORAGE TEMP.,HUMID.AND ALTITUDE -40 to +100C, 20 to 95%RH (Non condensing), 9,000m (30,000feet) max VIBRATION 10 - 55Hz 98.0m/s2 (10G), 3minute period, 60minutes each along X, Y and Z axis IMPACT 490.3m/s2 (50G) 11ms, once each along X, Y and Z axis AGENCY APPROVALS UL60950-1, C-UL, EN60950-1 CASE SIZE/WEIGHT 22.0x12.0x9.5mm [0.87x0.48x0.38 inches] (WXHXD) / 7g max COOLING METHOD Convection/Forced air *1Single output +24V, +30V with no use of COM. *2Rated input 5V, 12V, 24V or 48V DC Io=100% *3Symmetrical loading from 20% to 100%. *4Symmetrical loading from 0% to 100%. *5Ripple and Ripple Noise is measured by using test board with ceramic capacitor 1 F at 50mm from output pins. Po:Output wattage. *6Drift is the DC output accuracy for eight hours period after a half-hour warm-up at 25C. *Parallel operation with other model is not possible. MG-46 MGFW10 External view Recommended Pad and Hole dia. Model (TOP VIEW) 7-f0.9 3.5 [0.14] 0.5 [0.02] 12 [0.48] Model 2.11 [0.09] 17.78 [0.7] Vin Vin RC NC Vout COM Vout 22 [0.87] 0.25 [0.01] 9.5 [0.38] 2.54 [0.1] Unit : 0.1inch Dimension : mm 2.8 [0.11] Tolerance 0.5 [0.02] Dimensions in mm, [ ]= inches Pin terminal material : Copper Planting treatment of terminal : Lead free plating Case material : PBT Weight 7g max 0.5 [0.02] 3.5 [0.14] 0.5 [0.02] 12 [0.48] <Pin Configuration (Option : Y2)> 2.11 [0.09] 17.78 [0.7] Vin Vin RC TRM Vout COM Vout 22 [0.87] 0.25 [0.01] 9.5 [0.38] 2.54 [0.1] 0.5 [0.02] MG-47 Ordering information DC-DC Converters PCB Mount Type MGFW15 MGF 1 W 2 15 24 3 05 4 5 -O 6 1 Series name 2 Dual output 3 Output wattage 4 Input voltage 5 Output voltage 6 Optional G : Capacitor between Input and Output is removed. R : with Remote ON/OFF (Positive logic control) R MODEL MGFW152405 MGFW152412 MGFW152415 MGFW154805 MGFW154812 MGFW154815 MAX OUTPUT WATTAGE[W] 15 15.6 15 15 15.6 15 5 or +10 12 or +24 15 or +30 5 or +10 12 or +24 15 or +30 1.5 0.65 0.5 1.5 0.65 0.5 MODEL MGFW152405 MGFW152412 MGFW152415 MGFW154805 MGFW154812 MGFW154815 VOLTAGE[V] DC9 - 36 0.36typ VOLTAGE[V] DC OUTPUT *1 CURRENT[A] SPECIFICATIONS INPUT CURRENT[A] *2 0.74typ 0.74typ 0.70typ 0.37typ 0.37typ EFFICIENCY[%] *2 84typ 88typ 89typ 84typ 87typ 88typ VOLTAGE[V] 5(+10) 12(+24) 15(+30) 5(+10) 12(+24) 15(+30) CURRENT[A] 1.5 0.65 0.5 1.5 0.65 0.5 LINE REGULATION[mV] 40max 60max 75max 40max 60max 75max *3 500max *5 600max 750max 500max *5 600max 750max *4 250max 480max 600max 250max 480max 600max -20 to +60C 100max 100max 100max 100max 100max 100max -40 to -20C 120max 120max 120max 120max 120max 120max -20 to +60C 100max 100max 100max 100max 100max 100max -40 to -20C 150max 150max 150max 150max 150max 150max -20 to +60C 50max 150max 180max 50max 150max 180max -40 to +60C 80max 240max 290max 80max 240max 290max 50max 60max 50max 50max 60max 14.602 - 15.505 4.935 - 5.240 11.765 - 12.492 14.602 - 15.505 LOAD REGULATION[mV] RIPPLE[mVp-p] OUTPUT *6 RIPPLE NOISE[mVp-p] *6 TEMPERATURE REGULATION[mV] DRIFT[mV] *7 START-UP TIME[ms] 50max 30max (Minimum input, Io=100%) OUTPUT VOLTAGE SETTING[V]*8 4.935 - 5.240 PROTECTION OVERCURRENT PROTECTION CIRCUIT AND REMOTE ON/OFF OTHERS ISOLATION DC18 - 76 11.765 - 12.492 Works over 105% of rating and recovers automatically Provided (Negative logic L:ON, H:OFF) INPUT-OUTPUT DC1,500V 1minute, Cutoff current = 10mA, DC500V 1,000MW min (2015C) INPUT-CASE DC1,000V 1minute, Cutoff current = 10mA, DC500V 1,000MW min (2015C) OUTPUT-CASE DC1,000V 1minute, Cutoff current = 10mA, DC500V 1,000MW min (2015C) OPERATING TEMP.,HUMID.AND ALTITUDE -40 to +85C, 20 to 95%RH (Non condensing) (Required Derating), 3,000m (10,000feet) max ENVIRONMENT SAFETY OTHERS STORAGE TEMP.,HUMID.AND ALTITUDE -40 to +100C, 20 to 95%RH (Non condensing), 9,000m (30,000feet) max VIBRATION 10 - 55Hz, 98.0m/s2 (10G), 3minutes period, 60minutes each along X, Y and Z axis IMPACT 490.3m/s2 (50G), 11ms, once each along X, Y and Z axis AGENCY APPROVALS UL60950-1, C-UL, EN60950-1 CASE SIZE/WEIGHT 25.4X9.9X25.4mm [1X0.39X1 inches] (WXHXD) / 20g max COOLING METHOD Convection/Forced air *1Single output +10V, +24V, +30V with no use of COM. *2Rated input 12V, 24V or 48V DC lo=100% *3 Symmetrical loading from 5% to 100%. *4 Symmetrical loading from 20% to 100%. *5 Refer to the instruction manual 11. *6Ripple and Ripple Noise is measured by using test board with ceramic capacitor 22 F at 50mm from output pins. (20MHz Osilloscope) *7Drift is the DC output accuracy for eight hours period after a half-hour warm-up at 25C. MG-48 *8Rated input voltage (DC24V, DC48V), rated output wattage, ambient temperature at 25C. *Parallel operation with other model is not possible. MGFW15 External view Name Plate Recommended Pad and Hole dia. (TOP VIEW) 6-f1.5 9.9 [0.39] Case 3.5 [0.14] Bottom Cover f 1 0.1 Unit : 0.1inch Dimension : mm 10.16 [0.4] +Vout 2.54 [0.1] 25.4 [1.0] COM -Vin 10.16 [0.4] 7.62 [0.3] 5.08 [0.2] +Vin RC -Vout Tolerance 0.5 [0.02] Dimensions in mm, [ ]=inches Pin terminal material : Copper Plating treatment of terminal : Lead free plating Case material : Brass Plating treatment of case : Nickel plating Bottom Cover : FR4 (t=0.6) [t=0.024] Please keep enough creepage distance with the pattern on PCB and other components. Weight 20g max 20.32 [0.8] 25.4 [1.0] MG-49 Ordering information DC-DC Converters PCB Mount Type MGFW30 MGF 1 W 2 30 24 3 05 4 5 -O 6 1 Series name 2 Dual output 3 Output wattage 4 Input voltage 5 Output voltage 6 Optional G : Capacitor between Input and Output is removed. R : with Remote ON/OFF (Positive logic control) R MODEL MGFW302405 MGFW302412 MGFW302415 MGFW304805 MGFW304812 MGFW304815 MAX OUTPUT WATTAGE[W] 20 30 30 20 30 30 5 or +10 12 or +24 15 or +30 5 or +10 12 or +24 15 or +30 2 1.25 1 2 1.25 1 MODEL MGFW302405 MGFW302412 MGFW302415 MGFW304805 MGFW304812 MGFW304815 VOLTAGE[V] DC9 - 36 0.72typ VOLTAGE[V] DC OUTPUT *1 CURRENT[A] SPECIFICATIONS INPUT CURRENT[A] *2 0.98typ 1.42typ 1.44typ 0.49typ 0.71typ EFFICIENCY[%] *2 85typ 88typ 87typ 85typ 88typ 87typ VOLTAGE[V] 5(+10) 12(+24) 15(+30) 5(+10) 12(+24) 15(+30) CURRENT[A] 2 1.25 1 2 1.25 1 LINE REGULATION[mV] 40max 60max 75max 40max 60max 75max *3 500max *5 600max 750max 500max *5 600max 750max *4 250max 480max 600max 250max 480max 600max -20 to +60C 100max 100max 100max 100max 100max 100max -40 to -20C 120max 120max 120max 120max 120max 120max -20 to +60C 100max 100max 100max 100max 100max 100max -40 to -20C 150max 150max 150max 150max 150max 150max -20 to +60C 50max 150max 180max 50max 150max 180max -40 to +60C 80max 240max 290max 80max 240max 290max 50max 60max 50max 50max 60max 14.602 - 15.505 4.935 - 5.240 11.765 - 12.492 14.602 - 15.505 LOAD REGULATION[mV] RIPPLE[mVp-p] OUTPUT DC18 - 76 *6 RIPPLE NOISE[mVp-p] *6 TEMPERATURE REGULATION[mV] DRIFT[mV] *7 START-UP TIME[ms] 50max 30max (Minimum input, Io=100%) OUTPUT VOLTAGE SETTING[V]*8 4.935 - 5.240 11.765 - 12.492 PROTECTION OVERCURRENT PROTECTION Works over 105% of rating and recovers automatically CIRCUIT AND OVERVOLTAGE PROTECTION Works over 120 to 160% of rating (Total of +V and -V) OTHERS REMOTE ON/OFF Provided (Negative logic L:ON, H:OFF) ISOLATION INPUT-OUTPUT DC1,500V 1minute, Cutoff current = 10mA, DC500V 1,000MW min (2015C) INPUT-CASE DC1,000V 1minute, Cutoff current = 10mA, DC500V 1,000MW min (2015C) OUTPUT-CASE DC1,000V 1minute, Cutoff current = 10mA, DC500V 1,000MW min (2015C) OPERATING TEMP.,HUMID.AND ALTITUDE -40 to +85C, 20 to 95%RH (Non condensing) (Required Derating), 3,000m (10,000feet) max ENVIRONMENT SAFETY OTHERS STORAGE TEMP.,HUMID.AND ALTITUDE -40 to +100C, 20 to 95%RH (Non condensing), 9,000m (30,000feet) max VIBRATION 10 - 55Hz, 98.0m/s2 (10G), 3minutes period, 60minutes each along X, Y and Z axis IMPACT 490.3m/s2 (50G), 11ms, once each along X, Y and Z axis AGENCY APPROVALS UL60950-1, C-UL, EN60950-1 CASE SIZE/WEIGHT 25.4X9.9X50.8mm [1X0.39X2 inches] (WXHXD) / 40g max COOLING METHOD Convection/Forced air *1Single output +10V, +24V, +30V with no use of COM. *2Rated input 12V, 24V or 48V DC lo=100% *3 Symmetrical loading from 5% to 100%. *4 Symmetrical loading from 20% to 100%. *5 Refer to the instruction manual 11. *6Ripple and Ripple Noise is measured by using test board with ceramic capacitor 22 F at 50mm from output pins. (20MHz Osilloscope) MG-50 *7Drift is the DC output accuracy for eight hours period after a half-hour warm-up at 25C. *8Rated input voltage (DC24V, DC48V), rated output wattage, ambient temperature at 25C. *Parallel operation with other model is not possible. MGFW30 External view Name Plate Recommended Pad and Hole dia. (TOP VIEW) 6-f1.5 9.9 [0.39] Case 3.5 [0.14] Bottom Cover f 1 0.1 Unit : 0.1inch Dimension : mm +Vout 10.16 [0.4] 5.08 [0.2] +Vin -Vin 25.4 [1.0] 10.16 [0.4] 10.16 [0.4] COM RC 5.08 [0.2] -Vout Tolerance 0.5 [0.02] Dimensions in mm, [ ]=inches Pin terminal material : Copper Plating treatment of terminal : Lead free plating Case material : Brass Plating treatment of case : Nickel plating Bottom Cover : FR4 (t=0.6) [t=0.024] Please keep enough creepage distance with the pattern on PCB and other components. Weight 40g max 45.72 [1.8] 50.8 [2.0] MG-51 Ordering information DC-DC Converters PCB Mount Type MGFW40 MGF 1 W 2 40 24 3 05 4 5 -O 6 1 Series name 2 Dual output 3 Output wattage 4 Input voltage 5 Output voltage 6 Optional G : Capacitor between Input and Output is removed. R : with Remote ON/OFF (Positive logic control) R MODEL MGFW400512 MGFW400515 MGFW402412 MGFW402415 MGFW404812 MGFW404815 MAX OUTPUT WATTAGE[W] 31.2 30 40.8 42 40.8 42 12 or +24 15 or +30 12 or +24 15 or +30 12 or +24 15 or +30 1.3 1 1.7 1.4 1.7 1.4 MODEL MGFW400512 MGFW400515 MGFW402412 MGFW402415 MGFW404812 MGFW404815 VOLTAGE[V] DC4.5 - 13 (Surge Voltage 15V, 100ms max) DC9 - 36 (Surge Voltage 50V, 100ms max) DC18 - 76 (Surge Voltage 100V, 100ms max) VOLTAGE[V] DC OUTPUT *1 CURRENT[A] SPECIFICATIONS INPUT CURRENT[A] *2 7.26typ 6.90typ 1.87typ 1.92typ 0.93typ EFFICIENCY[%] *2 86typ 87typ 91typ 91typ 91typ 91typ VOLTAGE[V] 12(+24) 15(+30) 12(+24) 15(+30) 12(+24) 15(+30) CURRENT[A] 1.3 1 1.7 1.4 1.7 1.4 LINE REGULATION[mV] 60max 75max 60max 75max 60max 75max *3 600max 750max 600max 750max 600max 750max *4 LOAD REGULATION[mV] RIPPLE[mVp-p] OUTPUT *5 RIPPLE NOISE[mVp-p] *5 TEMPERATURE REGULATION[mV] 0.96typ 480max 600max 480max 600max 480max 600max -20 to +60C 100max 100max 100max 100max 100max 100max -40 to -20C 120max 120max 120max 120max 120max 120max -20 to +60C 100max 100max 100max 100max 100max 100max -40 to -20C 150max 150max 150max 150max 150max 150max -20 to +60C 150max 180max 150max 180max 150max 180max -40 to +60C 240max 290max 240max 290max 240max 290max 60max 50max 60max 50max 60max 11.765 - 12.492 14.602 - 15.505 11.765 - 12.492 14.602 - 15.505 DRIFT[mV] *6 START-UP TIME[ms] 50max 30max (Minimum input, Rated load) OUTPUT VOLTAGE SETTING[V]*7 11.765 - 12.492 14.602 - 15.505 PROTECTION OVERCURRENT PROTECTION Works over 105% of rating and recovers automatically CIRCUIT AND OVERVOLTAGE PROTECTION Work over 115 to 140% of rating (Total of +Vo and -Vo) OTHERS REMOTE ON/OFF Provided (Negative logic L:ON, H:OFF) ISOLATION INPUT-OUTPUT DC1,500V 1minute, Cutoff current = 10mA, DC500V 1,000MW min (2015C) INPUT-CASE DC1,000V 1minute, Cutoff current = 10mA, DC500V 1,000MW min (2015C) OUTPUT-CASE DC1,000V 1minute, Cutoff current = 10mA, DC500V 1,000MW min (2015C) OPERATING TEMP.,HUMID.AND ALTITUDE -40 to +85C, 20 to 95%RH (Non condensing) (Required Derating), 3,000m (10,000feet) max ENVIRONMENT SAFETY OTHERS STORAGE TEMP.,HUMID.AND ALTITUDE -40 to +100C, 20 to 95%RH (Non condensing), 9,000m (30,000feet) max VIBRATION 10 - 55Hz, 98.0m/s2 (10G), 3minutes period, 60minutes each along X, Y and Z axis IMPACT 490.3m/s2 (50G), 11ms, once each along X, Y and Z axis AGENCY APPROVALS UL62368-1, C-UL (CSA62368-1), EN62368-1 CASE SIZE/WEIGHT 25.4X9.9X25.4mm (WXHXD) / 30g max COOLING METHOD Convection/Forced air *1Single output +24V/+30V with no use of COM *2Rated input voltage(DC5V , DC24V, DC48V) Io=100% *3Symmetrical loading from 0% to 100% *4Symmetrical loading from 20% to 100% *5Riple and Ripple Noizu is measured by using test board with ceramic capacitor 22F and Recommended Capacitance at 50mm from output pins. (20MHz Oscilloscope) *6Drift is the DC output accuracy for eight hour period after a half-hour warm-up at 25C MG-52 *7Rated input voltage (DC5V, DC24V, DC48V), rated output wattage, ambient temperature at 25C *Parallel operation with other model is not possible. MGFW40 External view Name Plate Recommended Pad and Hole dia. (TOP VIEW) 6-f1.5 9.9 [0.39] Case 3.5 [0.14] Bottom Cover f 1 0.1 Unit : 0.1inch Dimension : mm 10.16 [0.4] +Vout 2.54 [0.1] 25.4 [1.0] COM -Vin 10.16 [0.4] 7.62 [0.3] 5.08 [0.2] +Vin RC -Vout Tolerance 0.5 [0.02] Dimensions in mm, [ ]=inches Pin terminal material : Copper Plating treatment of terminal : Lead free plating Case material : Brass Plating treatment of case : Nickel plating Bottom Cover : FR4 (t=0.6) [t=0.024] Please keep enough creepage distance with the pattern on PCB and other components. Weight 30g max 20.32 [0.8] 25.4 [1.0] MG-53